by If your Trane thermostat rebooting non-stop and you experienced the same issue recently also wondering how you can go about it, simply keep reading. Now, in short, if your Trane thermostat keeps rebooting, dirt/dust or low battery power could be the felon.
You need to get a soft cloth and clean the thermostat. If the problem perseveres, simply replace the batteries (for battery-powered Trane thermostat), or just power cycle the thermostat.
Trane Thermostat Keeps Rebooting
If the problem continues, you need to keep reading for more details on how you can simply resolve this problem.
Wipe the Dust on Your Thermostat
Now, your Trane thermostat might keep rebooting because it is dirty, and dirt and dust might seem harmless to you, but could occasionally affect the proper functioning of a device.
You need to remove the cover of your thermostat and dust off the interior with a clean, dry cloth. Once the thermostat is free of dirt, replace the cover and study the device for 5 minutes.
If your thermostat stays on within this time, you have resolved the issue. But if the rebooting problem persists, continue to the next step.
Replace the Batteries in Your Thermostat
Low batteries in your Trane thermostat might cause the device to reboot continuously. The batteries in the thermostat supply most of the power in the device. Therefore, if these batteries are low, your thermostat won’t be able to stay on for a long time.
You can simply fix this issue by changing the thermostat’s batteries and you’ll need 3 new AAA batteries.
You need to follow these steps to replace the batteries on your Trane thermostat:
- Simply Grab your thermostat at the top and bottom
- Then, you need to pull it carefully until you unmount the device from the wall.
- After that, you need to turn the device over to reveal the batteries.
- Now, you simply need to remove all the old batteries from the battery compartment.
- Now, you need to get the new batteries and insert them into the compartment and simply make sure you’ve positioned the batteries suitably in the case.
- At last, once you’ve finished inserting the new batteries, simply remount your thermostat to the wall.
Now, you just have to wait a few minutes to see if the thermostat keeps rebooting. If it does, move on to the next step.
Test Your Circuit Breaker
If your Trane thermostat has been power cycling non-stop, your circuit breaker might be defective. Now, to rule out this problem, you’ll simply need to test your circuit breaker.
Here’s how you can do that:
- You need to make sure you have another smart device in your home apart from your thermostat and a smart hub will serve for this test.
- Simply keep your smart hub (or another smart device) plugged into power.
- After that, you need to flip off your circuit breaker.
- Then, you need to move it back to the ‘On’ position.
Now, simply check if your smart hub is rebooting, and If the smart hub reboots, your circuit breaker is working correctly.
But if the hub stays on all over the circuit breaker test, your breaker might be faulty. Simply ask your electrician to review your breaker if you suspect it is malfunctioning.
Though, if you’ve confirmed that your circuit breaker is working well, but your thermostat keeps rebooting, you simply need to try the next step.
Clean the Air Filters in Your HVAC System
Now, your thermostat isn’t the only device that reacts to dirt and when your HVAC system comprises debris, it might start malfunctioning.
Now, by extension, the Trane thermostat might also disobey because it can’t manage the HVAC system.
You can simply resolve this problem by cleaning the air filters in your HVAC system and this is because all the dirt in the HVAC system is stored in the air filters.
The guide below will show you how you can clean your air filters:
- Initially, you need to turn off your HVAC system and if the system doesn’t have a switch, simply flip off your circuit breaker.
- You need to search for the vent on your HVAC (air conditioner or furnace). Now, when you find the vent, you need to use a screwdriver to detach it from the system.
- Then, you should see your air filter here and simply remove the air filter from your HVAC system.
- Now, you need to take the filter outside for vacuuming.
- Simply Run the brush attached to your vacuum cleaner through the air filter and simply make sure to take out all the dirt stuck in the air filter.
- Then, simply after cleaning the air filter thoroughly, you simply need to fill your sink with some amount of water.
- After that, you need to add some distilled vinegar in the same quantity as the water in your sink.
- Then, simply soak the air filter in the solution for one hour and you need to rinse the filter with water.
- Now, once the filter is totally dry, simply re-insert it into your HVAC system.
- Lastly, you need to fix the vent back onto the HVAC system with your screwdriver.
Move Your Thermostat Away from Other Smart Appliances
Typically, smart appliances like televisions and electric lamps, frequently radiate heat after they’ve been working for a while, and if you place your thermostat near any of these appliances, the device might confuse the heat coming from them with the genuine temperature in the room.
Now, as such, the thermostat might reboot to simply regulate the supposed room temperature and since the heat from most electronic appliances rises as you keep using them, your thermostat might keep rebooting for a long time.
Now, to simply fix this issue, you need to move the thermostat away from other smart devices in your home. You can just remount the thermostat on a wall that isn’t unprotected from sunlight.
The wall at the center of your home might be a decent place to reinstall your thermostat. If your thermostat lasts rebooting after you’ve changed its location, you need to move on to the next step.
Also, Check:
Conclusion:
We have shared everything about Trane Thermostat Keeps Rebooting in this article for you if the info that we shared above helped you in any way then do share it with others.
